Description
CBS220-48P-4X-EU
The Cisco Smart Switch CBS220-48P-4X-EU is a versatile and reliable solution that will provide your business with the necessary network infrastructure. This model features 48 Gigabit Ethernet ports with Power over Ethernet Plus (PoE+) support, allowing you to power network devices without the need for additional power supplies.
High performance and flexibility
TheCBS220-48P-4X-EU is a switch that offers many options for growing your network. In addition to 48 Gigabit Ethernet ports, it has 4 10-Gigabit Ethernet ports with SFP+ interface support for high bandwidth and low latency data transfer. It is the ideal solution for businesses that need a high-performance, high-bandwidth network.
Easy configuration and management
Configuring and managing your network has never been so easy. The CBS220-48P-4X-EU switch features an intuitive graphical interface that allows you to easily configure and monitor your network. Whether you are an experienced network administrator or just starting out with Cisco technology, this switch will be a pleasure to use.
Network security
Securing data on the network is a priority for any business. The CBS220-48P-4X-EU switch offers advanced security features such as access control, port-level authentication and access control list (ACL). This will keep your network protected from unauthorised access and attacks.
Energy efficiency
Cisco cares about the environment. The CBS220-48P-4X-EU switch has been optimised for energy efficiency. As a result, it consumes less energy, resulting in lower operating costs and a lower environmental impact. In summary, the Cisco Smart CBS220-48P-4X-EU is an excellent choice for businesses that need an efficient, reliable and easy-to-manage network Its advanced features, high performance and attention to data security make it an investment in the future of your business. Invest in a Cisco solution immediately and enjoy a stable and efficient network.
CBS220-48P-4X-EU Specification |
|
| Capacity in Millions of Packets per Second (MPPS) (64-byte packets) | 130.94 |
| Switching Capacity in Gigabits per Second (GBPS) | 176.0 |
| Total System Ports | 48 Gigabit Ethernet + 4 x 10G |
| RJ-45 Ports | 48 x Gigabit Ethernet |
| Combo Ports (RJ45 + Small form-factor pluggable [SFP]) | 4 x SFP+ |
| Packet Buffer | 3 MB |
| Unit dimensions (W x D x H) | 445 x 350 x 44 mm (17.5 x 13.78 x 1.73 in) |
| Layer 3 | |
| IPv4 routing | Wire speed routing of IPv4 packets
Up to 990 static routes and up to 128 IP interfaces |
| IPv6 routing | Wire speed routing of IPv6 packets |
| Layer 3 Interface | Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface |
| Classless Interdomain Routing (CIDR) | Support for classless interdomain routing |
| RIP v2 | Support for Routing Information Protocol version 2 for dynamic routing |
| Policy-Based Routing (PBR) | Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL) |
| DHCP Server | Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes
Support for DHCP options |
| DHCP relay at Layer 3 | Relay of DHCP traffic across IP domains |
| User Datagram Protocol (UDP) relay | Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets |
| Quality of Service | |
| Priority levels | 8 hardware queues |
| Scheduling | Strict priority and Weighted Round-Robin (WRR) |
| Rate limiting | Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based; 2R3C policing |
| Congestion avoidance | A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization |
| iSCSI traffic optimization | A mechanism for giving priority to iSCSI traffic over other types of traffic |
| Green (power efficiency) | |
| Energy Detect | Automatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss of any packets when the switch detects the link up |
| Cable length detection | Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables. |
| EEE Compliant (802.3az) | Supports IEEE 802.3az on all copper Gigabit Ethernet ports |
| Disable port LEDs | LEDs can be manually turned off to save on energy |
| Time-based port operation | Link up or down based on user-defined schedule (when the port is administratively up) |
| Time-based POE | POE power can be on or off based on user-defined schedule to save energy |
| General | |
| Jumbo frames | Frame sizes up to 9K bytes. The default MTU is 2K bytes |
| MAC table | 16K addresses |
| Hardware | |
| USB slot | USB Type-A slot on the front panel of the switch for easy file and image management |
| Buttons | Reset button |
| Cabling type | Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T |
| LEDs | System, Link/Act, POE, Speed |
| Flash | 256 MB |
| CPU | 800 MHz ARM |
| DRAM | 512 MB |
| Environmental | |
| Storage temperature | -13° to 158°F (-25° to 70°C) |
| Operating humidity | 10% to 90%, relative, noncondensing |
| Storage humidity | 10% to 90%, relative, noncondensing |
| Warranty | Limited lifetime with next business day advance replacement (where available) |
| Package Contents | |
| CBS220-48P-4X-EU Cisco Business 350 Series Managed Switch
Power Cord (Power adapter for select 8-port and 16-port SKUs) Mounting Kit Quick Start Guide |
|
Minimum Requirements |
|
| Web browser: Chrome, Firefox, Edge, Safari
Category 5e Ethernet network cable TCP/IP, network adapter, and network operating system ( Microsoft Windows, Linux, or Mac OS X) Installed
|
|
