Home
Shop
Wishlist0

AR720 SME Network AR Router

AR720

Huawei Router NetEngine AR720, 2*GE combo WAN, 8*GE LAN, 2*USB 2.0, 2*SIC

 

EGP38,000

Buy Now Compare
Availability: Available on backorder
SKU:AR720
Brand:

Description

AR720

Within the Huawei NetEngine AR700 series, there are two main models: NetEngine AR720 and NetEngine AR730. The AR720 router provides forwarding performance ranging from 9 Mpps to 25 Mpps, supports up to 700 terminals, and comes with dedicated WAN and LAN ports. Its compact dimensions are just 43.6 mm x 442 mm x 220 mm.

Item Details
Description AR720, 2*GE combo WAN, 8*GE LAN, 2*USB 2.0, 2*SIC
Part Number 02354GBG-001
Model AR720
First supported version V300R022C00
Supported Patch Version

If you want to downgrade a device running V300R022C10SPC100 or a later version to V300R019C10SPC600, V300R019C13SPC200, or V300R021C00SPC200 after the component upgrade, downgrade the device to V300R022C00SPC100 first.

If you want to downgrade a device to a version earlier than V300R022C00SPC100 after the component upgrade, set the patch for next startup to the start patch of the target version or a later patch. ( start patch of V300R019C10SPC600 is V300R019SPH380; the start patch of V300R019C13SPC200 is V300R019SPH380; the start patch of V300R021C00SPC200 is V300R021SPH180.)

Remarks When configuring cards, ensure that the total power of the configured cards does not exceed 37 W or contact technical support engineers to obtain more suggestions.

Appearance

Figure 3-7 Appearance of the AR720

This model has had changes to its appearance and branding, and devices delivered over different periods may have different appearances but have no differences in functions.

Components

Figure 3-8 Components of the AR720

1. Product model silkscreen

2. LAN interfaces: eight GE electrical interfaces

3. Two SIC slots

4. Ground point

5. AC power jack

6. Jack for power cable locking strap

NOTE:

Insert a power cable locking strap in this jack to secure the power cable.

7. RESET button

NOTE:

This button is used to reset the router.

  • To restore the factory settings, hold down the button for at least 5 seconds.
  • To reset the router, hold down the button for less than 5 seconds.

Resetting the router will interrupt services. Exercise caution when deciding to press this button.

8. WAN interfaces: two GE combo interfaces

9. USB interface 2.0 (host)

10. USB interface 2.0 (host)

11. Console interface

Slot Layout

Figure 3-9 Slot Layout of the AR720

Table 3-12 Slots on the AR720

Slot Type Slot ID Slot Direction Remarks
SIC 1 Transverse Slot 1 and slot 2 are combined into new slot 2 (WSIC).
SIC 2 Transverse Slot 1 and slot 2 are combined into new slot 2 (WSIC).

Ports

Table 3-13 Ports on the AR720

Port Connector Type Description Available Components
Console interface RJ45

The console interface can connect to an operation terminal for onsite configuration.

  • Standards compliance: RS232
  • Working mode: duplex Universal Asynchronous Receiver/Transmitter (UART)
  • Data equipment type: Data Circuit-terminating Equipment (DCE)

Console cable

LAN interfaces: eight GE electrical interfaces RJ45

A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.

  • Standards compliance: IEEE802.3, IEEE802.3u, and IEEE802.3ab
  • Working mode: full-duplex (10/100/1000 Mbit/s auto-sensing)
  • Maximum distance: 100 m

NOTE:

GE0 is a management interface and is used for web-based management and email-based deployment.

All LAN-side GE interfaces can be configured as WAN-side interfaces.

Ethernet cable

WAN interfaces: two GE combo interfaces

GE electrical interface: RJ45

GE optical interface: LC/PC

A GE combo interface consists of an optical Ethernet interface and an electrical Ethernet interface on the panel. The two interfaces have only one internal forwarding interface. The electrical and optical interfaces are multiplexed, and only either of them can work at a time. When either of the Ethernet interfaces is working, the other interface is shut down.

  • The GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
  • The GE optical interface (100/1000 Mbit/s auto-sensing) transmits and receives services at 100 Mbit/s or 1000 Mbit/s.

NOTE:

By default, a combo interface works in auto mode and automatically works as an optical or electrical interface.

  • GE electrical interface: Ethernet cable
  • GE optical interface: optical module

The following optical modules are supported:

FE SFP&eSFP Optical Modules

GE eSFP Optical Modules

GPON&EPON Optical Modules (Available in V300R023C00 and Later Versions)

GE SFP Copper Modules (Available in V300R023C00 and Later Versions)

USB 2.0 ports (Host): two USB 2.0 ports USB 2.0 Type A

A USB 2.0 interface provides up to 480 Mbit/s upload and download rates.

  • Standards compliance: USB 2.0
  • Working mode: Host

USB 2.0-compliant USB flash drive

Indicators and Buttons

Figure 3-10 Indicators and buttons on the AR720

1. From top to bottom:

  • PWR indicator
  • Show More
    Product has been added to your cart