Home
Shop
Wishlist0

Huawei ekit S220S-24T4JX SWITCH

S220S-24T4JX

They feature flexible Ethernet networking, diversified security control, and abundant management methods, and provide higher performance and richer service processing capabilities. Widely used in economic hotels, factories, small and medium-sized education, shelter hospitals, buildings Scenarios.

WhatsApp Button Call for Price

Compare
Availability: Available on backorder
SKU:S220S-24T4JX
Brand:

Description

S220S-24T4JX

Overview

Table 4-30 Basic information about the S220S-24T4JX

Item Details
Description S220S-24T4JX (24*10/100/1000BASE-T ports, 2*10GE SFP+ ports, 2*2.5GE SFP ports, built-in AC power, Fanless)
Part Number 98012504
Model S220S-24T4JX
First supported version V600R024C00

Components

Figure 4-14 S220S-24T4JX appearance
 S220S-24T4JX
1 One RST button

NOTICE:

To restore the factory settings and reset the device, hold down the button for at least 6 seconds.

To reset the device, press the button.

Resetting the device will cause service interruption. Exercise caution when you press the button.

2 Twenty-four 10/100/1000BASE-T ports
3 Two 10GE SFP+ optical ports 4 Two 2.5GE SFP optical ports
5 AC socket

NOTE:

It is used with an AC power cable.

6 Jack for AC power cable locking strap

NOTE:

The AC power cable locking strap is not delivered with the switch.
7 Ground screw

NOTE:

It is used with a ground cable.

Ports

Table 4-31 Ports on the S220S-24T4JX

Port Connector Type Description Available Components
10/100/1000BASE-T port RJ45 A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s. Ethernet cable
2.5GE SFP optical port SFP A 2.5GE SFP Ethernet optical port sends and receives service data at 100 Mbit/s, 1 Gbit/s, or 2.5 Gbit/s.

The four optical ports of the device can work at a maximum of two different rates at the same time. If they work at three different rates (10 Gbit/s, 2.5 Gbit/s, and 1000/100 Mbit/s) at the same time, the ports of one rate cannot go Up.

10GE SFP+ optical port SFP+ A 10GE SFP+ Ethernet optical port sends and receives service data at 100 Mbit/s, 1 Gbit/s, or 10 Gbit/s.

The four optical ports of the device can work at a maximum of two different rates at the same time. If they work at three different rates (10 Gbit/s, 2.5 Gbit/s, and 1000/100 Mbit/s) at the same time, the ports of one rate cannot go Up.

Indicators and Buttons

Figure 4-15 Indicators on the Switch
 S220S-24T4JX

The S220S-8T2X model is used as an example.

Table 4-32 Description of indicators on the switch

No. Indicator Name Color Status Description
1 PWR Power module indicator Off The switch is powered off.
Green Steady on The power supply is normal.
2 SYS System status indicator Off The system is not running.
Green Fast blinking The system is starting.
Green Steady on During the system startup preparation phase, the SYS indicator is steady green, which lasts for a maximum of 30 seconds.
Green Slow blinking The system is running normally.
Red Steady on The system does not work normally after registration, or a fan alarm or a temperature alarm has been generated.
3 CLOUD Cloud indicator Off The management VLAN of the device does not obtain an IP address.
Blue Steady on The network is connected, and the management VLAN of the device obtains an IP address.
Blue Fast blinking The device is connecting to the cloud.
Blue Slow blinking The device is in the cloud management state.
4 Service port indicator (one indicator for each port) Off The port is not connected or has been shut down.
Green Steady on A link has been established on the port.
Green Blinking The port is sending or receiving data.

Power Supply System

The switch has a built-in AC power module and does not support pluggable power modules.

Heat Dissipation System

The device has no fans and uses natural heat dissipation.

Technical Specifications

Table 4-33 Technical specifications of the S220S-24T4JX

Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442 mm x 160 mm (1.72 in. x 17.40 in. x 6.30 in.)

Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442 mm x 167 mm (1.72 in. x 17.40 in. x 6.57 in.)

Dimensions with packaging (H x W x D) [mm(in.)] 90.0 mm x 550.0 mm x 260.0 mm (3.54 in. x 21.65 in. x 10.24 in.)
Chassis height [U] 1 U
Chassis material Metal
Weight without packaging [kg(lb)] 1.97 kg (4.34 lb)
Weight with packaging [kg(lb)] 2.76 kg (6.08 lb)
Typical power consumption [W] 21.32 W
Typical heat dissipation [BTU/hour] 72.75 BTU/hour
Maximum power consumption [W] 21.9 W
Maximum heat dissipation [BTU/hour] 74.72 BTU/hour
Static power consumption [W] 11.14 W
MTBF [years] 59.31 years
MTTR [hours] 2 hours
Availability > 0.99999
Noise at normal temperature (acoustic power) [dB(A)] Noise-free (no fans)
Noise at normal temperature (acoustic pressure) [dB(A)] Noise-free (no fans)
Number of card slots 0
Number of power slots 0
Number of fans modules 0
Redundant power supply Not supported
Long-term operating temperature [°C(°F)] –5°C to +40°C (41°F to 104°F) at an altitude of 0-1800 m (0-5905.44 ft.)
Restriction on the operating temperature variation rate [°C(°F)] When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

Devices cannot start when the temperature is lower than 0°C (32°F).

Storage temperature [°C(°F)] –40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH] 5% RH to 95% RH (non-condensing)
Long-term operating altitude [m(ft.)] 0–5000 m (0–16404 ft.)
Storage altitude [m(ft.)] 0-5000 m (0-16404 ft.)
Power supply mode AC built-in
Rated input voltage [V] AC input: 100–240 V AC; 50/60 Hz
Input voltage range [V] AC input: 90 V AC to 264 V AC; 45 Hz to 65 Hz
Maximum input current [A] 0.8 A
Memory DDR4: 512 MB
Flash memory NAND flash: 256 MB
Console port Not supported
Eth Management port Not supported
USB Not supported
RTC Not supported
RPS input Not supported
Power supply surge protection [kV] ±4 kV in differential mode and ±4 kV in common mode
Ingress protection level (dustproof/waterproof) IP20
Types of fans None
Heat dissipation mode Natural heat dissipation
Airflow direction
PoE Not supported
Certification EMC certification

Safety certification

Manufacturing certification

 

Product has been added to your cart