C9300L-24P-4X-A Specification

PROLINK Cat.6 patch cords are used for connecting the network equipment to patch panels and telecommunications outlets.
They are suitable for frequencies of up to 250 MHz

Key Features & Benefits of the GWN7813P 24-Port Enterprise L3 Managed PoE Switch with 4x 10G SFP+ Uplink Ports:

• 24x Gigabit Ethernet PoE Ports
• 4x 10Gigabit SFP+ Ports
• Smart power control to support dynamic PoE/PoE+ power allocation per port
• PoE Standards: IEEE 802.3af/at/bt
• Max Output Power per PoE Port:
  – Ports 1-8 60W (PoE++)
  – Ports 9-24 30W
• Max PoE Power Budjet: 360W
• External Redundant Power Supply (RPS): 54V(300W)
• 1x Console Port
• 1x Reset Pinhole
• Link Aggregation: 14
• Forwarding Mode: Store-and-forward
• Total non-blocking throughput: 64Gbps
• Switching Capability: 128Gbps
• Forwarding Rate: 95.232Mpps
• Packet Buffer: 12MB
• Switching:

• 2/4 Gigabit Ethernet ports, 6/24 Gigabit SFP ports, and 4/12 10Gigabit SFP+ ports
• Supports deployment in IPv6 and IPv4 networks
• ARP Inspection, IP Source Guard, DoS protection, port security & DHCP snooping
• Embedded controller to manage switch; GWN. Cloud and GWN Manager, Grandstream’s cloud and on-premise network management platform
• Built-in QoS allows for prioritization of network traffic

PROLINK Cat.6 patch cords are used for connecting the network equipment to patch panels and telecommunications outlets.
They are suitable for frequencies of up to 250 MHz

PROLINK Cat.6 patch cords are used for connecting the network equipment to patch panels and telecommunications outlets.
They are suitable for frequencies of up to 250 MHz

Grandstream F-SM1310-10KM-10G is a single-mode SFP+ fiber module, that enables you to have an ultra-fast fiber connectivity in your enterprise-class LAN or WAN. It’s a hot-pluggable small-form factor transceiver module integrated with the high sensitivity PIN receiver and signal conditioner for 10 Gigabit Ethernet applications over a maximum transfer distance of 10km.

Grandstream F-MM850-300M-10G is a multi-mode SFP+ fiber module, that enables you to have an ultra-fast fiber connectivity in your enterprise-class LAN or WAN. It’s a hot-pluggable small-form factor transceiver module integrated with the high sensitivity PIN receiver and signal conditioner for 10 Gigabit Ethernet applications over a maximum transfer distance of 300mtrs.

PROLINK Cat.6 patch cords are used for connecting the network equipment to patch panels and telecommunications outlets.
They are suitable for frequencies of up to 250 MHz

PROLINK Cat.6 patch cords are used for connecting the network equipment to patch panels and telecommunications outlets.
They are suitable for frequencies of up to 250 MHz

Description

ProLink CAT6 U/UTP Cable, 23AWG, white jacket, 4 pair count, 305 m length Reel in a box

• Conductor: Solid copper wire AWG23 (Ø 0.58mm).
• Insulation: Polyethylene ≤ Ø 1.1 mm.
• Cable lay up: 4 pairs to the core, non-metallic cross separator (spline).
• Cable core lying: Waterproof compound to prevent moisture migration and water protection.
• Sheath: Orange, PVC.

PROLINK Cat.6 patch cords are used for connecting the network equipment to patch panels and telecommunications outlets.
They are suitable for frequencies of up to 250 MHz