Home
Shop
Wishlist0

Huawei ekit S220S-24P4JX SWITCH

S220S-24P4JX at 100 Mbit/s, 1 Gbit/s, or 2.5 Gbit/s. The four optical ports of the device can work at a maximum of two different rates at the same time

WhatsApp Button Call for Price

Compare
Availability: Available on backorder
SKU:S220S-24P4JX
Brand:

Description

S220S-24P4JX

Overview

Table 4-39 Basic information about the S220S-24P4JX

Item Details
Description S220S-24P4JX (24*10/100/1000BASE-T ports (400 W PoE+), 2*10GE SFP+ ports, 2*2.5GE SFP ports, built-in AC power)
Part Number 98012518
Model S220S-24P4JX
First supported version V600R024C00
Remarks If the upper-level circuit breaker for a device is also connected to many other devices, a C32 or above circuit breaker needs to be used. If the upper-level circuit breaker for a device is connected only to this device, a C25 or below circuit breaker can be used.

 S220S-24P4JX Components

Figure 4-18 S220S-24P4JX appearance
1 One RST button

NOTICE:

To restore the factory settings and reset the device, hold down the button for at least 6 seconds.

To reset the device, press the button.

Resetting the device will cause service interruption. Exercise caution when you press the button.

2 One MODE button
3 Twenty-four 10/100/1000BASE-T PoE+ ports 4 Two 10GE SFP+ optical ports
5 Two 2.5GE SFP optical ports 6 Ground screw

NOTE:

It is used with a ground cable.
7 Jack for AC power cable locking strap

NOTE:

The AC power cable locking strap is not delivered with the switch.
8 AC socket

NOTE:

It is used with an AC power cable.

Ports

Table 4-40 Ports on the S220S-24P4JX

Port Connector Type Description Available Components
10/100/1000BASE-T port RJ45 A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s. Ethernet cable
2.5GE SFP optical port SFP A 2.5GE SFP Ethernet optical port sends and receives service data at 100 Mbit/s, 1 Gbit/s, or 2.5 Gbit/s.

The four optical ports of the device can work at a maximum of two different rates at the same time. If they work at three different rates (10 Gbit/s, 2.5 Gbit/s, and 1000/100 Mbit/s) at the same time, the ports of one rate cannot go Up.

10GE SFP+ optical port SFP+ A 10GE SFP+ Ethernet optical port sends and receives service data at 100 Mbit/s, 1 Gbit/s, or 10 Gbit/s.

The four optical ports of the device can work at a maximum of two different rates at the same time. If they work at three different rates (10 Gbit/s, 2.5 Gbit/s, and 1000/100 Mbit/s) at the same time, the ports of one rate cannot go Up.

Indicators and Buttons

Figure 4-19 Indicators on the Switch
 S220S-24P4JX

The S220S-26PN4JX model is used as an example.

Table 4-41 Description of indicators on the switch

No. Indicator Name Color Status Description
1 PWR Power module indicator Off The switch is powered off.
Green Steady on The power supply is normal.
2 SYS System status indicator Off The system is not running.
Green Fast blinking The system is starting.
Green Steady on During the system startup preparation phase, the SYS indicator is steady green, which lasts for a maximum of 30 seconds.
Green Slow blinking The system is running normally.
Red Steady on The system does not work normally after registration, or a fan alarm or a temperature alarm has been generated.
3 CLOUD Cloud indicator Off The management VLAN of the device does not obtain an IP address.
Blue Steady on The network is connected, and the management VLAN of the device obtains an IP address.
Blue Fast blinking The device is connecting to the cloud.
Blue Slow blinking The device is in the cloud management state.
4 PoE PoE indicator Off The PoE mode is not selected.
Green Steady on The PoE mode is selected, and service port indicators show the PoE status of each port.
5 MODE Mode switch button
  • When you press this button once (hold it down for more than 1 second), the service port indicators change to the PoE mode and show the PoE status of each service port.
  • When you press this button a second time (hold it down for more than 1 second), the service port indicators restore to the default mode and show the connection status and link activity of each service port.

If you do not press the MODE button within 45 seconds, the service port indicators restore to the default mode. In this case, the PoE indicator is off.

6 Service port indicator (one indicator for each port) Arrowheads show the positions of ports. A down arrowhead indicates a port at the bottom, and an up arrowhead indicates a port at the top. Meanings of service port indicators vary in different modes. For details, see Table 4-42.
Table 4-42 Description of service port indicators in different modes (one indicator for each port)

Display Mode Color Status Description
Default mode Off The port is not connected or has been shut down.
Green Steady on A link has been established on the port.
Green Blinking The port is sending or receiving data.
PoE mode Off The port is not providing power to a powered device (PD).
Green Steady on The port is providing power to a PD.
Green Blinking The power of the PD connected to the port exceeds the power capacity of the port or the power threshold configured on the port. Alternatively, the PD does not comply with IEEE standards.

Power Supply System

The switch has a built-in AC power module and does not support pluggable power modules. The built-in power module can provide 400 W PoE power, which ensures full PoE power on 24 ports in compliance with 802.3af or on 13 ports in compliance with 802.3at.

Heat Dissipation System

The switch has two built-in fans for forced air cooling. Air flows in from the left side and front panel, and exhausts from the right side.

When working properly at a normal temperature, the device meets the desktop-class noise requirements. However, the fan speed may be high and the noise may be loud during device startup.

 S220S-24P4JX

This figure only shows the airflow direction and does not depict the actual device.

 S220S-24P4JX Technical Specifications

Table 4-43 Technical specifications of the S220S-24P4JX

Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442 mm x 220 mm (1.72 in. x 17.40 in. x 8.66 in.)

Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442 mm x 227 mm (1.72 in. x 17.40 in. x 8.94 in.)

Dimensions with packaging (H x W x D) [mm(in.)] 90.0 mm x 550.0 mm x 360.0 mm (3.54 in. x 21.65 in. x 14.17 in.)
Chassis height [U] 1 U
Chassis material Metal
Weight without packaging [kg(lb)] 2.8 kg (6.17 lb)
Weight with packaging [kg(lb)] 3.71 kg (8.18 lb)
Typical power consumption [W] 33.32 W
Typical heat dissipation [BTU/hour] 113.68 BTU/hour
Maximum power consumption [W]
  • Without PoE: 38.58 W
  • Full PoE load: 482.55 W (PoE: 400 W)
Maximum heat dissipation [BTU/hour]
  • Without PoE: 131.63
  • Full PoE load: 1646.51
Static power consumption [W] 18.74 W
MTBF [years] 48.77 years
MTTR [hours] 2 hours
Availability > 0.99999
Noise at normal temperature (acoustic power) [dB(A)] 52.8 dB(A)
Noise at normal temperature (acoustic pressure) [dB(A)] 40.1 dB(A)
Number of card slots 0
Number of power slots 0
Number of fans modules 2
Redundant power supply Not supported
Long-term operating temperature [°C(°F)] –5°C to +45°C (23°F to 113°F) at an altitude of 0 to 1800 m (0 to 5905.44 ft.)
Restriction on the operating temperature variation rate [°C(°F)] When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

Devices cannot start when the temperature is lower than 0°C (32°F).

Storage temperature [°C(°F)] –40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH] 5% RH to 95% RH (non-condensing)
Long-term operating altitude [m(ft.)] 0–5000 m (0–16404 ft.)
Storage altitude [m(ft.)] 0-5000 m (0-16404 ft.)
Power supply mode AC built-in
Rated input voltage [V]
  • AC input: 100 V AC to 240 V AC, 50/60 Hz
  • High-voltage DC input: 240 V DC
Input voltage range [V]
  • AC input: 90 V AC to 290 V AC; 45 Hz to 65 Hz
  • High-voltage DC input: 190 V DC to 290 V DC
Maximum input current [A] 6 A
Memory DDR4: 512 MB
Flash memory NAND flash: 256 MB
Console port Not supported
Eth Management port Not supported
USB Not supported
RTC Not supported
RPS input Not supported
Power supply surge protection [kV] Differential mode: ±6 kV; common mode: ±6 kV
Ingress protection level (dustproof/waterproof) IP20
Types of fans Built-in
Heat dissipation mode Air cooling for heat dissipation, intelligent fan speed adjustment
Airflow direction Air intake from left and front, air exhaustion from right
PoE Supported
Certification EMC certification

Safety certification

Manufacturing certification

Product has been added to your cart