Description
S5731-S48P4X
| Category | Specification |
|---|---|
| Model / Series | CloudEngine S5731‑S48P4X (S5700 Series) |
| Ports | 48 × 10/100/1000BASE‑T (PoE+) 4 × 10 Gigabit SFP+ uplink ports |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 125 Mpps |
| MAC Address Table | 64,000 entries |
| VLAN Support | Up to 4094 VLANs (IEEE 802.1Q) |
| QoS Features | 8 queues per port, SP, WRR, SP+WRR scheduling algorithms |
| Layer 3 Features | Static Routing, OSPF, IS-IS, BGP (license-dependent), RIP, IPv6, ACLs |
| PoE Support | PoE+/802.3at on all 48 ports Total PoE power budget depends on power modules |
| Power Supply | Dual hot-swappable AC/DC power modules (supports redundancy) |
| Power Consumption | Typical: ~132 W (without PoE load) Max: ~1750 W (full PoE load) |
| Surge Protection | ±6 kV on service and power ports |
| Dimensions (W × D × H) | 442 mm × 420 mm × 43.6 mm (1U) |
| Weight | ~8.8 kg (with packaging) |
| Operating Temperature | –5 °C to +45 °C |
| Storage Temperature | –40 °C to +70 °C |
| Humidity | 5% to 95% RH (non-condensing) |
| Noise Level | Typical: ~62.3 dB(A) Max Load: ~71.8 dB(A) |
| Stacking Support | Yes (iStack technology) |
| Management Options | CLI, Web UI, SNMP v1/v2/v3, Telnet, SSH, RMON |
| Security Features | 802.1X, MAC filtering, DHCP snooping, ARP inspection, AAA, port isolation |
| IPv6 Support | IPv4/IPv6 dual stack, tunnels, ND, DHCPv6 |
| Firmware Upgrade | USB, TFTP, FTP, SFTP, Auto Config |
| Use Case | Campus access, aggregation switch with PoE for IP phones, APs, and cameras |
