The following table lists the system specifications for the SR630 server.
|Machine types||7X01 – 1 year warranty
7X02 – 3 year warranty
|Form factor||1U rack-mount|
|Processor||Up to two 2nd Gen Intel Xeon Bronze, Silver, Gold, or Platinum processors:
1st Gen Intel Xeon processors are also supported.
|Memory||Up to 24 DIMM sockets (12 DIMMs per processor; six memory channels per processor with two DIMMs per channel). Support for RDIMMs, LRDIMMs (1st Gen processors only), or 3DS RDIMMs. Memory speed up to 2933 MHz depending on the processor selected. Memory types cannot be intermixed.|
|Persistent memory||Up to 12x TruDDR4 2666 MHz DCPMMs in the DIMM slots. Not supported with 1st Gen Intel Xeon SP processors.|
Note: Server configurations with more than 1 TB of memory capacity per socket (including DCPMMs and RDIMMs or 3DS RDIMMs) require processors that support up to 4.5 TB (L-suffix) per socket.
Note: In the configurations with DCPMMs, memory mirroring is supported only in the App Direct mode (other DCPMM modes do not support memory mirroring) and applies only to the RDIMMs or 3DS RDIMMs (DCPMMs are not mirrored). Memory sparing is not supported in the configurations with DCPMMs.
|Internal storage capacity||
|Optical drive bays||None. Support for an external USB DVD RW Optical Disk Drive (See Optical drives).|
|I/O expansion slots||Up to four slots. Slot 4 is the fixed slot on the system planar, and the remaining slots depend on the riser cards installed. The slots are as follows:
Slot 3 requires the second processor to be installed.
|Cooling||Five (one processor) or seven (two processors) hot-swap dual-rotor system fans with N+1 redundancy.|
|Power supply||Up to two redundant hot-swap 550 W, 750 W, or 1100 W (100 – 240 V) High Efficiency Platinum, or 750 W (200 – 240 V) High Efficiency Titanium AC power supplies. HVDC support (PRC only).|
|Video||Matrox G200e with 16 MB memory integrated into the XClarity Controller. Maximum resolution is 1920×1200 at 60 Hz with 32 bits per pixel.|
|Hot-swap parts||Drives, power supplies, and fans.|
|Systems management||XClarity Controller (XCC) Standard, Advanced, or Enterprise (Pilot 4 chip), proactive platform alerts, light path diagnostics, XClarity Provisioning Manager, XClarity Essentials, XClarity Administrator, XClarity Integrators for VMware vCenter and Microsoft System Center, XClarity Energy Manager, Capacity Planner.|
|Security features||Power-on password, administrator’s password, secure firmware updates, Trusted Platform Module (TPM) 1.2 or 2.0 (configurable UEFI setting). Optional lockable front bezel. Optional Trusted Cryptographic Module (TCM) or Nationz TPM (available only in PRC). Optional Lenovo Business Vantage security software (available only in PRC).|
|Operating systems||Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi. See the Operating systems section for specifics.|
|Warranty||One-year (Machine Type 7X01) or three-year (Machine Type 7X02) customer-replaceable unit (CRU) and onsite limited warranty with 9×5 Next Business Day Parts Delivered.|
|Service and support||Optional service upgrades are available through Lenovo Services: 2-hour or 4-hour response time, 6-hour or 24-hour committed service repair (select areas), warranty extension up to 5 years, 1-year or 2-year post-warranty extensions, YourDrive Your Data, Enterprise Software Support, and Basic Hardware Installation Services.|
|Dimensions||Width: 435 mm (17.1 in.), height: 43 mm (1.7 in.), depth: 750 mm (29.5 in.). See Physical specifications for details.|
|Weight||Minimum configuration: 11.9 kg (26.2 lb), maximum: 18.8 kg (41.4 lb)|
ThinkSystem SR630 models can be configured by using the Lenovo Data Center Solution Configurator (DCSC).
Configure-to-order (CTO) models are used to create models with factory-integrated server customizations. For CTO models, two base CTO models are available for the SR630 as listed in the following table, CTO1WW and CTOLWW:
- The CTO1WW base CTO model is for general business and is selectable by choosing General Purpose mode in DCSC.
- The CTOLWW base model is intended for High Performance Computing (HPC) and Artificial Intelligence (AI) configurations and solutions, including configurations for Lenovo Scalable Infrastructure (LeSI), and is enabled using either the HPC & AI LeSI Solutions mode or HPC & AI ThinkSystem Hardware mode in DCSC. CTOLWW configurations can also be built using System x and Cluster Solutions Configurator (x-config).
Preconfigured server models may also be available for the SR630, however these are region-specific; that is, each region may define their own server models, and not all server models are available in every region.
The following table lists the base CTO models of the ThinkSystem SR630 server.
for HPC and AI
|ThinkSystem SR630 – 3 year Warranty||7X02CTO1WW||7X02CTOLWW|
|ThinkSystem SR630 – 1 year Warranty||7X01CTO1WW||7X01CTOLWW|
For CTO orders, the following table lists the base chassis feature codes for the server.
There are currently two base feature codes for each of the 2.5-inch and 3.5-inch chassis. The “v2” bases include the new SR570 Air Duct Kit v2 which is required if a RAID 9350 adapter is to be configured. See the RAID flash power module (supercap) support section for details. The non-v2 bases can be selected if any other RAID adapter or HBA is selected.
|Base feature codes – suitable for all configurations except those with a RAID 9350 adapter|
|AUW0||ThinkSystem SR630 2.5″ Chassis with 8 Bays|
|AUW1||ThinkSystem SR630 2.5″ Chassis with 10 Bays|
|AUW2||ThinkSystem SR630 3.5″ Chassis with 4 Bays|
|Base feature codes – suitable for all configurations including ones with a RAID 9350 adapter (includes the SR630 Air Duct Kit v2)|
|BNPP||ThinkSystem SR630 2.5″ Chassis with 8 Bays v2|
|BNPN||ThinkSystem SR630 2.5″ Chassis with 10 Bays v2|
|BNPQ||ThinkSystem SR630 3.5″ Chassis with 4 Bays v2|
- Rack Installation Guide
- Electronic Publications Flyer
Models table conventions: The model tables shown in this section use the following conventions:
- Drive bays:
- If the number is shown as “x”, it represents the quantity of the SAS/SATA drive bays if no “U.2” is shown. If “U.2” is shown, it represents the quantity of the U.2 NVMe PCIe drive bays.
- If the number is shown as “x+y”, it represents the quantity of the SAS/SATA + AnyBay drive bays.
- SFF and LFF drive bays are hot-swap.
- M.2 drive bays are non-hot-swap.
- XClarity Controller: “S” = Standard, “A” = Advanced, “E” = Enterprise.
- Front VGA port: “Y” = Included; “N” = Not included, optional.
- Tool-less Rail Kit: “Y” = Included; “N” = Not included, optional.
- Cable Management Arm (CMA): “Y” = Included; “N” = Not included, optional.
- Power cord:
- “R1” = 1.5 m C13-C14 rack power cable.
- “R2” = 2.8 m C13-C14 rack power cable.
- “L2” = 2.8 m line cord.
- “N” = Not included; see Power supplies and cables for the ordering information.