Categories: , Brand:

SERVER IBM SystemX3650 M3

EGP5,999


CPU: Duel Xeon X5650 (2.60 GHz/6-core/12 MB Smart Cache)

Memory: 64GB ram DDR3 – (8*8 GB Ram DDR3 10600R)

Storage: 3*HDD 900GB SAS 10K

Duel Redundant Power supply


Share it:

Standard specifications

The following table lists the standard specifications.

Table 1. Standard specifications

Components Specification
Form factor 2U Rack.
Processor Up to two six-core (up to 3.46 GHz) or quad-core (up to 3.6 GHz) Intel Xeon 5600 series processors with QuickPath Interconnect technology up to 6.4 GT/s, and up to 1333 MHz memory speed. Also supports the Intel Xeon X5698 4.4 GHz dual-core processor. Supports specific Quad-core and Dual-core Intel Xeon 5500 series processors via Configure-To-Order (CTO).
Memory cache Up to 12 MB L3 for Xeon 5600 processors. Up to 8 MB L3 for Xeon 5500 processors.
Chipset Intel 5520.
Memory Up to 18 DIMM sockets (9 DIMMs per processor). Up to 288 GB with 16 GB DDR3 RDIMMs and 18 populated DIMM slots (up to 144 GB with 9 DIMMs per processor), or up to 48 GB with 4 GB DDR3 UDIMMs and 12 populated DIMM slots (up to 24 GB with 6 DIMMs per processor).
Memory protection ECC, ChipKill (for x4-based memory DIMMs), memory mirroring, and memory sparing.
Disk drive bays Up to 16 2.5″ hot-swap SAS/SATA HDDs or solid-state drives.
Maximum internal storage Up to 25.6 TB with 1.6 TB SSDs, or
Up to 19.2 TB with 1.2 TB SAS HDDs, or
Up to 16.0 TB with 1 TB SATA HDDs
Intermix of SAS/SATA/SSD is supported.
RAID support RAID 0, 1, 1E with ServeRAID-BR10il v2 or M1015; RAID 0, 1, 5, 10, 50 with M5014 or M5015. Optional upgrade to RAID 5 is available for M1015. Optional upgrade to RAID 6, 60 is available for M5014/M5015.
Optical drive bays One, support for DVD-ROM or Multiburner. Separate bay.
Tape drive bays Optional Tape Enablement Kit is available to support one DDS5, DDS6, or RDX internal tape drive. If used, the maximum number of HDD bays is limited to 8.
Network interfaces Integrated 2 ports, plus 2 ports on optional Gigabit Ethernet with Ethernet Daughter Card (does not consume PCIe slot).
PCI Expansion slots Up to 5 (up to 4 available, one slot is dedicated to RAID controller), dependant on the riser cards used (three different riser cards are available: 2x PCI-E x8 Gen 2, 1x PCI-E x16 Gen 2, and 2x PCI-X 64 bit/133 MHz). Up to two riser cards are supported.
External ports Two USB 2.0 and one DB-15 video on front. Two USB 2.0, one DB-15 video, one DB-9 serial, one RJ-45 systems management, up to 4 RJ-45 network ports (2 standard, 2 optional) on rear. One internal USB port for embedded hypervisor.
Cooling IBM Calibrated Vectored Cooling™ with 3 counter-rotating hot swap fans with N+1 redundancy. Altimeter is to control fan speed based on atmospheric pressure.
Power supply Up to 2 redundant hot-swap 460 W AC or 675 W AC or 675 W high-efficiency (HE) AC power supplies with 90%+ efficiency. 675 W -48 V DC models are available via CTO.
Hot-swap components Hard drives, power supplies, fans.
Systems management UEFI, IBM Integrated Management Module (IMM), Predictive Failure Analysis, Light Path Diagnostics, Automatic Server Restart, IBM Systems Director* and IBM Systems Director Active Energy Manager™, IBM ServerGuide. Optional Virtual Media Key for remote presence (graphics, keyboard and mouse, virtual media).
Security features Power-on password, administrator’s password, Trusted Platform Module (TPM)
Video Matrox G200eV with 16 MB memory integrated into the IMM. Maximum resolution is 1280×1024 at 75 Hz with 16M colors.
Operating systems supported Microsoft Windows Server 2008 R2 and 2008, Red Hat Enterprise Linux 5 and 6, SUSE Linux Enterprise Server 10 and 11, VMware ESX 4.1 and VMware ESXi 4.1 embedded hypervisor, Sun Solaris 10.
Limited warranty 3-year customer-replaceable unit and onsite limited warranty with 9×5/next business day response time.
Service and support Optional service upgrades are available through IBM ServicePacs®: 4-hour or 2-hour response time, 8 hours fix time, 1-year or 2-year warranty extension, remote technical support for IBM hardware and selected IBM and third-party (Microsoft, Linux, VMware) software.

* Effective October 12, 2012, or until supply is depleted, IBM will discontinue the shipment of IBM Systems Director DVDs with IBM System x servers and IBM BladeCenter chassis. IBM Systems Director Express Edition and IBM Systems Director Standard Edition, which include software subscription and support, continue to be available for IBM System x servers and IBM Blade Centers.

The x3650 M3 servers are shipped with the following items:

  • Statement of Limited Warranty
  • Important Notices
  • Rack Installation Instructions
  • Documentation CD that contains the Installation and User’s Guide
  • IBM Gen 2 Slides Kit
  • IBM Gen 2 Cable Management Arm (CMA)
  • 2.8 m C13-C14 power cord (one for models with one power supply and two for models with two power supplies)

Standard models

The following table lists the standard models.

Table 2. Standard models

Model Processor*
(2 maximum)
Memory RAID
controller
Disk bays
(std / max)
Disks Network Optical Power
supply
Models announced February 2011
7945-12x 1x Xeon E5603 1.60 GHz
4C, 4 MB, 1066 MHz
1x 4 GB BR10il v2 4 / 16 Open 2x GbE Optional 1x 460 W
7945-22x 1x Xeon E5606 2.13 GHz
4C, 8 MB, 1066 MHz
1x 4 GB M1015 8 / 16 Open 2x GbE Optional 1x 460 W
7945-32x 1x Xeon E5607 2.26 GHz
4C, 8 MB, 1066 MHz
1x 4 GB M1015 8 / 16 Open 2x GbE Optional 1x 460 W
7945-D2Y 1x Xeon E5620 2.40GHz
4C, 12MB, 1066MHz
1x 4 GB 16 / 16 Open 2x GbE Optional 1x 80 W
7945-D4x 1x Xeon E5620 2.40 GHz
4C, 12 MB, 1066 MHz
1x 4 GB M1015 8 / 16 Open 2x GbE Optional 1x 460 W
7945-H4x 1x Xeon L5640 2.26 GHz
6C, 12 MB, 1333 MHz
1x 4 GB M5015
+ Battery
8 / 16 Open 2x GbE Optional 1x 460 W
7945-52x 1x Xeon E5645 2.40 GHz
6C, 12 MB, 1333 MHz
1x 4 GB M5014 8 / 16 Open 2x GbE Optional 1x 460 W
7945-54x 2x Xeon E5645 2.40 GHz
6C, 12 MB, 1333 MHz
2x 4 GB M5014 8 / 16 Open 2x GbE Optional 2x 675 W HE
7945-62x 1x Xeon E5649 2.53 GHz
6C, 12 MB, 1333 MHz
1x 4 GB M5014 8 / 16 Open 2x GbE Optional 1x 460 W
7945-J4x 1x Xeon X5650 2.66 GHz
6C, 12 MB, 1333 MHz
1x 4 GB M5015
+ Battery
8 / 16 Open 2x GbE Optional 1x 675 W
7945-L4x 1x Xeon X5660 2.80 GHz
6C, 12 MB, 1333 MHz
1x 4 GB M5015
+ Battery
8 / 16 Open 2x GbE Optional 1x 675 W
7945-72x 1x Xeon X5675 3.06 GHz
6C, 12 MB, 1333 MHz
1x 4 GB M5015
+ Battery
8 / 16 Open 2x GbE Optional 1x 675 W HE
7945-82x 1x Xeon X5690 3.46 GHz
6C, 12 MB, 1333 MHz
1x 4 GB M5015
+ Battery
8 / 16 Open 2x GbE Optional 1x 675 W HE

* Processor detail: Processor quantity and model, core speed, number of cores, L3 cache, memory speed.

Refer to the Specifications section for information about standard features of the server.

Standard models with SAP Preloaded

The following table lists the models that include SAP Discovery System v4 preloaded with SUSE Linux ES SAP Business All-in-one.

Table 3. Standard preload models

Model Processor*
(2 maximum)
Memory RAID
adapter
Disk bays
(std / max)
Disks Network Optical Power
supply
7945-JSx† 2x Xeon X5650 6x 4 GB M5015
+ Battery
8 / 16 7x 300 GB SAS
+ 1x 500 GB SATA
2x GbE Multiburner 2x 675 W
7945-J6x† 2x Xeon X5650 6x 4 GB M5015
+ Battery
8 / 16 7x 300 GB SAS
+ 1x 500 GB SATA
2x GbE Multiburner 2x 675 W HE
7945-JCx† 2x Xeon X5650 6x 4 GB M5015
+ Battery
8 / 16 7x 300 GB SAS
+ 1x 500 GB SATA
2x GbE Multiburner 2x 675 W HE

* Processor detail: Processor quantity and model, core speed, number of cores, L3 cache, memory speed.
† Models include SAP Discovery System v4 preloaded with SUSE Linux ES SAP Business All-in-one.

Refer to the Specifications section for information about standard features of the server.

Express Models

Table 4. Express models

Region /
model
Processor*
(2 maximum)
Memory RAID
controller
Disk bays
(std / max)
Disks Network Optical Power
supply
NA
7945-E7U 2x Xeon X5675 3.06 GHz
6C 12 MB 1333 MHz
6x 4 GB M5015
+ Battery
8 / 16 Optional 2x GbE Multi-
burner
2x 675 W
7945-E8U 1x Xeon E5649 2.53GHz
6C 12MB 1333MHz
3x 4 GB M5015
+ Battery
8 / 16 Optional 2x GbE Multi-
burner
2x 460 W
LA
7945-E7Ux 2x Xeon X5675 3.06 GHz
6C 12 MB 1333 MHz
6x 4 GB M5015
+ Battery
8 / 16 Optional 2x GbE Multi-
burner
2x 675 W
7945-E8U 1x Xeon E5649 2.53 GHz
6C 12 MB 1333 MHz
3x 4 GB M5015 16 / 16 Optional 2x GbE Multi-
burner
1x 460 W
7945-EAU 1x Xeon E5645 2.40 GHz
6C, 12 MB, 1333 MHz
1x 4 GB M1015 8 / 16 1x 146 GB 2x GbE Multi-
burner
1x 460 W
7945-EBU 1x Xeon E5649 2.53 GHz
6C 12 MB 1333 MHz
2x 8 GB M5014 16 / 16 1x 300 GB 2x GbE Multi-
burner
2x 460 W
7945-D4U 1x Xeon E5620 2.40 GHz
4C 12 MB 1066 MHz
1x 4 GB M1015 8 / 16 Optional 2x GbE Multi-
burner
1x 460 W
7945-J4U 1x Xeon X5650 2.66 GHz
6C 12 MB 1333 MHz
1x 4 GB M5015 8 / 16 Optional 2x GbE Multi-
burner
1x 675 W
7945-54U 2x Xeon E5645 2.40 GHz
6C, 12 MB, 1333 MHz
2x 4 GB M5014 8 / 16 Optional 2x GbE Multi-
burner
2x 675 W
7945-52U 1x Xeon E5645 2.40 GHz
6C, 12 MB, 1333 MHz
1x 4 GB M5014 8 / 16 Optional 2x GbE Multi-
burner
1x 675 W
7945-82U 1x Xeon X5690 3.46 GHz
6C 12 MB 1333 MHz
1x 4 GB M5015 8 / 16 Optional 2x GbE Multi-
burner
1x 675 W

* Processor detail: Processor quantity and model, core speed, number of cores, L3 cache, memory speed.

Processor options

Features of the Intel Xeon 5600 processors used in the x3650 M3 include:

  • Intel QuickPath Technology (QPI), a platform architecture that provides high-speed (up to 25.6 GBps), and point-to-point connections both between processors and between processors and the I/O hub. Each processor has its own dedicated memory that it accesses directly through an Integrated Memory Controller. In cases where a processor needs to access the dedicated memory of another processor, it can do so through the high-speed QPI that links all the processors.
  • Turbo Boost Technology dynamically turns off unused processor cores and increases the clock speed of the cores in use. It will increase the frequency in steps of 133 MHz (to a maximum of three steps or 400 MHz) as long as the processors’ predetermined thermal and electrical requirements are still met. For example, with three cores active, a 2.26 GHz processor can run the cores at 2.4 GHz. With only one or two cores active, the same processor can run those cores at 2.53 GHz. All Xeon 5600 processors support Turbo Boost with the exception of L5609, E5607, E5606, and E5603.
  • Intel Hyper-Threading Technology, which boosts performance for multi-threaded applications by enabling simultaneous multi-threading within each processor core, up to two threads per core. Hyper-Threading reduces computational latency, thereby making optimal use of every clock cycle. All Xeon 5600 processors support Hyper-Threading Technology with the exception of L5609, E5607, E5606, and E5603.
  • Intelligent Power Capability powers individual processor elements on and off as needed, to reduce power draw.
  • Execute Disable Bit functionality can help prevent certain classes of malicious buffer overflow attacks when combined with a supporting operating system.
  • Intel Virtualization Technology integrates hardware-level virtualization hooks that allow operating system vendors to better utilize the hardware for virtualization workloads.

The x3650 M3 supports the processor options listed in the following table. The server supports up to two processors. This table shows which server models have each processor standard. If there is no corresponding where-used model for a particular processor then this processor is only available through CTO.

In the x3650 M3, two processors are standard and the server supports two maximum.

Table 5. Processor options

Part
number
Feature
code
Intel Xeon Processor Models
where used
Intel Xeon 5600 series processors
81Y6538 A0YX Intel Xeon E5603 4C 1.60GHz 4MB 1066MHz 80w 12x
59Y4022 7708 Intel Xeon E5640 4C 2.66GHz 12MB 1066MHz 80w G2x
81Y6542 A0Z1 Intel Xeon E5649 6C 2.53GHz 12MB 1333MHz 80w 62x
59Y4017 7703 Intel Xeon L5609 4C 1.86GHz 12MB 1066MHz 40w
59Y4018 7704 Intel Xeon L5630 4C 2.13GHz 12MB 1066MHz 40w C2x
59Y4019 7705 Intel Xeon L5640 6C 2.26GHz 12MB 1333MHz 60w H2x, H4x
81Y6541 A0Z0 Intel Xeon X5647 4C 2.93GHz 12MB 1066MHz 130w
59Y4024 7710 Intel Xeon X5660 6C 2.80GHz 12MB 1333MHz 95w L2x, L4x
59Y4026 7712 Intel Xeon X5667 4C 3.06GHz 12MB 1333MHz 95w
59Y4025 7711 Intel Xeon X5670 6C 2.93GHz 12MB 1333MHz 95w M2x
81Y6543 A0Z2 Intel Xeon X5672 4C 3.20GHz 12MB 1333MHz 95w
81Y6544 A0Z3 Intel Xeon X5675 6C 3.06GHz 12MB 1333MHz 95w 72x
59Y4028 7714 Intel Xeon X5680 6C 3.33GHz 12MB 1333MHz 130w N2x
81Y6545 A0Z4 Intel Xeon X5687 4C 3.60GHz 12MB 1333MHz 130w
81Y6546 A0Z5 Intel Xeon X5690 6C 3.46GHz 12MB 1333MHz 130w 82x

Memory options

IBM DDR3 memory is compatibility tested and tuned for optimal System x performance and throughput. IBM memory specifications are integrated into the light path diagnostics for immediate system performance feedback and optimum system uptime. From a service and support standpoint, IBM memory automatically assumes the IBM system warranty, and IBM provides service and support worldwide.

The IBM System x3650 M3 supports up to nine DDR3 DIMMs when one processor is installed and up to 18 DIMMs when two processors are installed. However, the maximum number of DIMMs is limited by the number of ranks in the DIMMs:

  • RDIMMs
    • Up to 18 single-rank RDIMMs (nine per processor) for a maximum of 72 GB (18x 4 GB)
    • Up to 18 dual-rank RDIMMs for a maximum of 288 GB (18x 16 GB)
    • Up to 12 quad-rank RDIMMs for a maximum of 192 GB (12x 16 GB)
  • UDIMMs
    • Up to 12 dual-rank UDIMMs for a maximum of 48 GB (12x 4 GB)

Each processor has three memory channels, and there are three DIMMs per channel. RDIMMs can be populated three per channel. However, UDIMMs can only be populated two DIMMs per channel. That is, you can have up to 18 RDIMMs installed in the server, but only up to 12 UDIMMs. Mixing UDIMMs and RDIMMs is not supported.

Maximum memory speed is limited by memory speed supported by the specific processor and by the number and type of DIMMs installed (whichever has a lower memory speed rating), as follows:

  • Intel Xeon 5600 series processors:
    • 1333 MHz when one or two single-rank or dual-rank RDIMMs per channel are installed or one UDIMM per channel is installed
    • 1066 MHz when one quad-rank RDIMM per channel is installed or two UDIMMs per channel are installed
    • 800 MHz when three single-rank or dual-rank RDIMMs or two quad-rank RDIMMs per channel are installed

The server supports both 1.5 V and 1.35 V DIMMs. Mixing 1.5 V and 1.35 V DIMMs in the same server is supported for Intel Xeon 5600 series processor-based systems, in such a case all DIMMs operate at 1.5 V. Intel Xeon 5500 series processor-based systems do not support 1.35 V DIMMs.

The following memory protection technologies are supported:

  • ECC
  • ChipKill (for x4-based RDIMMs)
  • Memory mirroring
  • Memory sparing

If memory mirroring is used then DIMMs must be installed in pairs (minimum of one pair per each CPU), and both DIMMs in a pair must be identical in type and size. If Memory Sparing is used then DIMMs must be installed in sets of three, and all DIMMs in the same set must be identical in type and size. Memory sparing is only supported for Intel Xeon 5600 series processor-based systems.

The following table lists memory options available for x3650 M3 server.

Table 6. Memory options

Part
number
Feature
code
Description Maximum
quantity
Models
where used
UDIMM
44T1569 1914 2GB (1x2GB, Dual Rankx8) PC3-10600
CL9 ECC DDR3-1333MHz LP UDIMM
12
49Y1403 A0QS 2GB (1x2GB, 1Rx8, 1.35V) PC3L-10600
CL9 ECC DDR3 1333MHz LP UDIMM
12
49Y1404 8648 4GB (1x4GB, 2Rx8, 1.35V) PC3L-10600
CL9 ECC DDR3 1333MHz LP UDIMM
12
1.35V RDIMM
49Y1405 8940 2GB (1x2GB, 1Rx8, 1.35V) PC3L-10600
CL9 ECC DDR3 1333MHz LP RDIMM
18
49Y1392 3893 2GB (1x2GB, 2Rx8, 1.35V) PC3L-10600
CL9 ECC DDR3 1333MHz LP RDIMM
18
49Y1394 3894 4GB (1x4GB, 2Rx4, 1.35V) PC3L-10600
CL9 ECC DDR3 1333MHz LP RDIMM
18 C2x, H2x
49Y1406 8941 4GB (1x4GB, 1Rx4, 1.35V) PC3L-10600
CL9 ECC DDR3 1333MHz LP RDIMM
18 Other models
49Y1407 8942 4GB (1x4GB, 2Rx8, 1.35V) PC3L-10600
CL9 ECC DDR3 1333MHz LP RDIMM
18
49Y1397 8923 8GB (1x8GB, 2Rx4, 1.35V) PC3L-10600
CL9 ECC DDR3 1333MHz LP RDIMM
18
49Y1398 8921 8GB (1x8GB, 2Rx4, 1.35V) PC3L-8500
CL7 ECC DDR3 1066MHz LP RDIMM
18
49Y1563 A1QT 16GB (1x16GB, 2Rx4, 1.35V) PC3L-10600
CL9 ECC DDR3 1333MHz LP RDIMM
18
49Y1400 8939 16GB (1x16GB, 4Rx4, 1.35V) PC3L-8500
CL7 ECC DDR3 1066MHz LP RDIMM
12
1.5V RDIMM
44T1592 1712 2GB (1x2GB, 1Rx8, 1.5V) PC3-10600
CL9 ECC DDR3 1333MHz LP RDIMM
18
49Y1433 8934 2GB (1x2GB, 2Rx8, 1.5V) PC3-10600
CL9 ECC DDR3 1333MHz LP RDIMM
18
49Y1434 8935 2GB (1x2GB, 1Rx4, 1.5V) PC3-10600
CL9 ECC DDR3 1333MHz LP RDIMM
18
44T1599 1713 4GB (1x4GB, Dual Rankx8) PC3-10600
CL9 ECC DDR3-1333MHz LP RDIMM
18
49Y1435 8936 4GB (1x4GB, 2Rx4, 1.5V) PC3-10600
CL9 ECC DDR3 1333MHz LP RDIMM
18
49Y1436 8937 8GB (1x8GB, 2Rx4, 1.5V) PC3-10600
CL9 ECC DDR3 1333MHz LP RDIMM
18
46C7483 1707 16GB (1x16GB, Quad Rankx4) PC3-8500
CL7 ECC DDR3 1066MHz LP RDIMM
12

Internal storage

IBM System x3650 M3 server supports the following internal storage configurations:

  • Four SATA 2.5″ SFF Simple-Swap drive bays (only available in CTO)
  • Four SAS/SATA 2.5″ SFF hot-swap drive bays
  • Eight SAS/SATA 2.5″ SFF hot-swap drive bays
  • Sixteen SAS/SATA 2.5″ SFF hot-swap drive bays
  • Eight SAS/SATA 2.5″ SFF hot-swap drive bays and internal tape drive

Figure 5 shows these configurations.

Reviews

There are no reviews yet.

Be the first to review “SERVER IBM SystemX3650 M3”

Your email address will not be published.

Custom Tab Content here.
Tail sed sausage magna quis commodo snasae. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur snasae aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.