-
Intel C610 series chipset
-
Intel E5-2600v3 processor family
-
Intel E5-2600v4 processor family
|
On system management chipset
|
HPE iLO (Firmware HPE iLO4 2.0) 4GB NAND
|
Memory
|
Type
|
HPE SmartMemoryDDR4 Registered (RDIMM) or Load Reduced (LRDIMM) or Persistent Memory (NVDIMM)
|
DIMM slots available
|
24 (12 DIMM slots per processor, 4 channels per processor, 3 DIMMs per channel)
|
Maximum capacity (LRDIMM)
|
3TB (24 x 128GB LRDIMM at 2400 MHz)
|
Maximum capacity (RDIMM)
|
768GB (24 x 32GB RDIMM at 2400 MHz)
|
Maximum capacity (NVDIMM)
|
128GB (16 x 8GB NVDIMM)
|
NOTE: NVDIMM support only with the E5-2600v4 processors, and RDIMMs only
- Mixing of 2133 and 2400 MHz memory is not supported
- Mixing of RDIMM and LRDIMM memory is not supported
- 128GB LRDIMM may not be mixed with other DIMM capacities/Types
|
Memory protection
|
Advanced ECC
|
Advanced ECC uses single device data correction to detect and correct single and all multi bit error that occurs within a single DRAM chip
|
Online spare
|
Memory online spare mode detects a rank that is degrading and switches operation to the spare rank
|
Expansion slots(Primary riser(Standard))
|
Expansion Slots
|
Technology
|
Bus Width
|
Connector Width
|
Bus Number
|
Form Factor
|
Primary Riser (Standard)
|
1
|
PCIe 3.0
|
x8
|
x16
|
7
|
Full-height, half length slot
|
2
|
PCIe 3.0
|
x8
|
x16
|
10
|
Full-height, half length slot
|
3
|
PCIe 3.0
|
x8
|
x8
|
13
|
Full-height, half length slot
|
Slot 2 PCIe Riser (Optional 3-slot) 719073-B21
|
4
|
PCIe 3.0
|
x16
|
x16
|
16
|
Full-height, full-length slot
|
5
|
PCIe 3.0
|
x16
|
x16
|
20
|
Full-height, full-length slot
|
6
|
PCIe 3.0
|
x8
|
x8
|
23
|
Full-height, half-length slot
|
Slot 1 PCIe Riser (Optional 2-slot) 719076-B21
|
2
|
PCIe 3.0
|
x16
|
x16
|
0x05
|
Full-height, full-length slot
|
3
|
PCIe 3.0
|
x8
|
x8
|
0x08
|
Full-height, half-length slot
|
NOTE:
- Bus width Indicates the number of physical electrical lanes running to the connector
- This will replace the standard primary riser and supports double wide cards
- All slots support PCIe cards to 150 W or more depending on card, but an additional power cord option is required (PN 669777-B21). See option section below for offering
- Double wide PCIe cards are only supported in risers with the processors leveraging the high performance heatsink. For Processors requiring double wide GPU support please order the GPU enablement kit (719082-B21)
|
Storage controller(One of the following depending on model)
|
Entry models
|
HPE Dynamic Smart Array B140i Controller
|
Base models
|
-
HPE Dynamic Smart Array B140i Controller
-
HPE Flexible Smart Array P440ar/2G FIO Controller
-
HPE Flexible Smart Array P840/4G FIO Controller
-
HPE Flexible Smart Array P840ar/4G FIO Controller
|
Performance models
|
|
NOTE:
- The embedded B140i controller will operate in UEFI only mode. For legacy support an additional controller will be needed, and for CTO orders please also select the legacy mode settings part, 758959-B22
- The B140i defaults to AHCI off the chipset. Smart array needs to be enables on the SATA only models if required
- The B140i will not operate in legacy mode
|
Internal storage devices(One of the following depending on model)
|
Optical drive
|
|
Hard drives
|
None ship standard
|
Hard drive bays
|
-
8 SFF with optional universal media bay or 8SFF bay options
-
24 SFF plus optional 2 SFF drives rear
-
12 LFF plus optional 3 LFF drives rear
-
4 LFF drive bays total
|
NOTE:
- The 3 LFF rear drives will consume space for the secondary riser
- The 12 LFF chassis also supports 2 SFF rear which allows for the second riser
- The 6 NVMe drive option can only be leveraged in the SFF chassis and replaces bay 2
- The Universal Media Bay (724865-B21) not available with the LFF chassis or the 24SFF front end, and can only be populated in bay1
- The 8SFF can be upgraded with a drive cage to 16 or 24 SFF with field upgrades. For optimal upgrade Bay2 should be populated second, with Bay 13 the last to be populated for a field upgrade to 24 SFF
- The 4LFF chassis cannot be upgraded to 12LFF in the field
- All Pre-configured chassis come with an embedded 10-Port SATA controller. Optional HPE Flexible Smart Array and Smart SAS HBA Controllers can be added
|
Maximum internal storage
|
Hot Plug SFF SAS
|
52.0TB
|
24+2 x 2TB (With optional rear SFF drive cage)
|
Hot Plug SFF SATA
|
52.0TB
|
24+2 x 2TB (With optional SFF drive cage)
|
Hot Plug LFF SAS
|
180.0TB
|
12+3 x 12TB (With optional rear LFF drive cage)
|
Hot Plug LFF SATA
|
180.0TB
|
12+3 x 12TB (With optional rear LFF drive cage)
|
Hot Plug SFF SAS SSD
|
397.8TB
|
24+2 x 15.3TB (With optional rear SFF drive cage)
|
Hot Plug SFF SATA SSD
|
99.84TB
|
24+2 x 3.84TB (With optional rear SFF drive cage)
|
Hot Plug LFF SATA SSD
|
57.6B
|
12+3 x 3.84TB (With optional rear LFF drive cage)
|
Hot Plug SFF NVMePCIe SSD
|
12TB NVMe +36TB SFF
|
6 x 2TB NVMe plus 36TB with 18 SFF (Bay 1, bay 3 and optional rear drive support)
|
|
Power supply
|
-
HPE 500 W Flex slot platinum hot plug power supply
-
HPE 800 W Flex slot platinum hot plug power supply
-
HPE 1400 W Flex slot platinum plus hot plug power supply
To review the power requirements for users selected system, please use the HPE Power advisor tool
|
System fans(One of the following depending on model)
|
Non-redundant
|
Redundant
|
2P model
|
6 fans
|
NOTE:
- 1P models typically ship with 4 standard fans. The second processor option kit contains 2additional fans
- The 12LFF and 24SFF chassis ship with 6 high performance fans as standard
- High performance fan kit is available to meet ambient temperature environments
- High performance fan kit is required for passive GPU support
- The 8SFF Bay1 kit (719067-B21) will ship with 6 high efficiency fans
|
Interfaces
|
Serial
|
Optional
|
Video
|
2 (1 front, optional VIA Universal Media Bay), 1rear not active simultaneously
|
Flexible LOM network ports
|
4 x 1Gb ports shipping standard with optional Flexible LOM
|
HPE iLO Remote management network port
|
1 Gb Dedicated
|
Micro SD slot
|
1 Micro SD
|
USB 3.0
|
Up to 5 total: 1 front, 2 rear, 2 internal (Secure), 2 optional USB2.0 front VIA Universal media bay
|
Systems Insight Display (SID)
|
Optional
|
NOTE:
- The Micro SD slot is not a hot-pluggable device. Users should not attempt to plug an SD card into the SD slot while the server is powered
- Not shipping as standard. Available as a CTO option or as a field upgrade (768900-B21)
|
Upgradeability
|
-
Upgradeable to two (2) processors (36 Cores)
-
Up to 24 DIMM slots available for higher memory capacity
-
Flexible LOM connector for 1 Gigabit or 10 Gigabit networking options
-
HPE Flexible smart array or Smart HBA controllers
-
Embedded 10-Port SATA, B140i as standard
-
Optional 3 slot riser (x16, x16, x8), or 2 slot (x16, x8)
-
Redundant power supply
-
Optical drive supported VIA universal media bay
-
HPE Legacy mode (FIO only, 758959-B22)
NOTE:
- To take advantage of the additional 3 PCI slot upgrade, the second processor must be installed
- The Universal media bay provides front VGA and 2xUSB 2.0, plus ability to add 2SFF and optical
- Universal media bay is only available with 8 or 8+8SFF chassis and can be populated inbay1 only
- UEFI is the default mode for CTO and BTO SKUs. Can change default to legacy VIA CTO
|
Industry standard compliance
|
NOTE:
- The DL380 Gen9 is now one of the first HPE ProLiant Gen9 Servers with Extended Ambient Support up to 45 C for data center infrastructures designed for better energy efficiency such as but not limited to fresh air cooling
- UEFI is the default for the DL380 Gen9. Legacy model can be selected in the field or as aCTO option (758959-B22)
|
Graphics
|
Integrated matrox G200eH2 video standard with 16MB of video RAM
-
1280 x 1024 (32 bp)
-
1920 x 1200 (16 bp)
HPE iLO 4 On system management memory
|
HPE Server UEFI/Legacy ROM
|
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
-
Secure boot
-
Operating system specific functionality
-
Support for > 2.2TB (Using GPT) boot drives
-
USB 3.0 stack
-
Embedded UEFI shell
-
Mass configuration deployment tool using HP RESTful API for iLO 4
-
PXE boot support for IPv6 networks
-
Boot support for option cards that only support a UEFI option ROM
-
Network stack configurations
NOTE:
- The UEFI system utilities function is analogous to the HPE ROM-Based setup utility (RBSU)of legacy BIOS
- UEFI Boot mode, boot environment and OS image installations should be configured properly to support UEFI
- UEFI FIO setting (758959-B22) can be selected to configure the system in legacy mode in the factory for users HPE ProLiant Gen9 Server.
|
Form factor
|
-
2U Rack form factor
-
8 SFF and 24 SFF drive bay version
-
8.73 x 44.55 x 67.94 cm (3.44 x 17.54 x 26.75 in)
-
4 LFF and 12 LFF drive bay version
-
8.73 x 44.55 x 73.02 cm (3.44 x 17.54 x 28.75 in)
|
Embedded management
|
-
HPE iLO
-
UEFI
-
RESTful API
-
Intelligent Provisioning
-
Embedded remote support
|
Server utilities
|
-
Smart update
-
HPE Systems Insight Manager(HPE SIM)
-
Scripting toolkit and windows Power Shell
-
RESTful Interface tool
-
HPE iLO mobile application
-
HPE Insight online
|
Security
|
-
Power-on password
-
Serial interface control
-
Administrator’s password
-
UEFI
-
iLO 4 has 12 customizable user accounts and SSL encryption
-
iLO can be disabled VIA a global setting
-
iLO Advanced supports directory services integration
-
TPM 1.2
|
Storage software
|
-
Data protection and recovery software
-
Data archive and migration software
-
Storage Resource Management Software (SRM)
-
Data replication software
-
Storage device management software
-
HPE StoreVirtual VSA
|
Reviews
There are no reviews yet.