Intel® Xeon® E5-2620 (2.0GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5)
Upgradeability Upgradeable to two processors (16 Cores)
Up to 24 DIMM slots available for higher Memory capacity
Up to 8 SFF Hard Drive Bays; Or 4 LFF Drive Bay (optional through CTO below)
FlexibleLOM slot for 1/10/40 Gigabit Ethernet or QDR/FDR InfiniBand networking options
2 PCIe 3.0 I/O slots for additional communications and storage expansion
Redundant Power Supply
Optical Drive Bay (8 SFF/4 LFF)
On System Management
HP iLO (Firmware: HP iLO 4)
16GB Registered DIMMs PC3-10600R (1333MHz)
HP Ethernet 10Gb 2-port 530FLR-SFP
HP Server ROM HP ROM (Read Only Memory) is now digitally signed using HP’s Corporate Signing Service. This signature is
verified before the flash process starts, reducing accidental programming and preventing malicious efforts
to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before control is
passed to the customer-installed operating system. The ROM also provides the capability of booting from
various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating
HP ROM performs very early configuration of the video controller, to allow monitoring of initialization
progress via an attached monitor. If configuration or hardware errors are discovered during this early
phase of hardware initialization, suitable messages are now displayed on the connected monitor.
Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to
assist in diagnosis.
HP’s ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
Internal Storage Devices
3*HDD 300GB SAS 6GBPS